Coconut ground cover 20M²

Coconut ground cover 20M² (10 blocks of approx. 4.5KG)

Click here for our complete overview of coconut ground cover (2 to 100 M2)

How do I prepare the coconut blocks for use?
That's very simple! The coconut is pressed into blocks and is still untreated. The coconut block needs to soak in a water bath for 10 minutes, completely submerged. The coconut and its fibers then soak up water fully, after which you can easily spread it out. This is often done in a (rain)barrel, wheelbarrow, large bucket or other container that can hold water.

Did you know that coconut ground cover is one of the most economical ground covers per M2 and that you can enjoy it for years because it decomposes very little? That's why you only need to maintain it once every 2 to 3 years by topping it up a bit. 

Composition of Coconut Ground Cover:
Thanks to years of experience, we have combined a good mix of coconut chips and coconut fibers in 1 block. When you use coconut as ground cover, you want nice large pieces of coconut (chips) and fibers. 



How thick should the coconut be spread?
We indicate that one block of approx. 4.5KG is sufficient for approximately 2M². You will then have a layer of approximately 2 to 3 cm thick of coconut ground cover. This is sufficient to cover the ground and you can still walk over it reasonably easily. Bark mulch needs to be spread much thicker because it decomposes much faster. Coconut ground cover gives a nicer appearance, decomposes much less and is a lot more economical. 



Features:
* 1 block is good for +/- 2M²
* Excellent coconut mixing ratio
* Works against weed growth
* Shock-absorbing, feels soft
* Longer lifespan than bark mulch
* Blocks are 30 x 30 and 10 cm thick.
* 1 block weighs approx. 4.5 KG.

Where to use:
* Borders, gives a beautiful appearance
* Garden, against weed growth
* Under playground equipment, feels soft and shock-absorbing
* Recreation, for laying paths
* Of course, also very suitable for various other locations

Who we sell the coconut to:
* Government
* Landscapers
* Recreation
* Private individuals
* Landscape architects

Extra general information:
Coconut can be used as ground cover for gardens, borders and recreational areas. Coconut has a longer lifespan than wood chips and also looks a lot nicer. Where you spread coconut chips, you will also notice that you suffer less from weed growth. Coconut chips are a byproduct of the coconut and are therefore 100 percent natural.

The appearance of coconut differs from that of bark mulch. The pieces are usually a bit smaller. Moreover, it is characterized by the distinctive fibers of the coconut husk. Both materials are dark brown and give your garden a natural look, although coconut is slightly redder than bark mulch. Coconuts only grow in tropical regions, which is reflected in the appearance of the coconut husk. Your garden gets an exotic touch. Which appearance you find most beautiful is of course entirely up to you. It also feels a lot softer, meaning it has a cushioning effect. Coconut ground cover is therefore frequently used under playground equipment.

Need a larger quantity? Contact our customer service or request a quote.